Quicksilver Mac

have the DHCP support. I have not done the upgrades on the IMac yet because I don't have internet accessability yet do to this problem but the Quicksilver is online. I checked both systems today for the DHCP window and neither one of them has it. ...

Reason I'm curious is I'm almost the identical problem with my Quicksilver G4 right now. ...

ze and I cannot figure out how to restore it to the ususal size. Help! Also, when I copy a music CD on my powerbook G4 and burn it, it will play just fine on Mac computers, but not on others and not in the CD player in my car. ...

G4 MDD G4 Quicksilver G3 Box G4 Box G5 Box

there are so many available pc fans and they will work in your mac also just make sure that the specs are not lower that the original fans in the way of CFM here are the stock fans specs CPU fan on a G4 933: Sunon 60x60x25mm 12 Volt, 2.2 Watt 23.5 CFM, 4500 RPM (max), 33.5 dBA

I should note that the logic board light was on....... I have never had any problems with my MAC until now...... Called a computer place and he thought that the new processor was bad and that it burned out my logic board. ...

is four discs and it boots OK, plug in my disc and it will boot but won't detect the screen. Screwdriver breaks. Now thats just rude. Go back upstairs and try my mac again, leave disc utility searching for half an hour, come back and its found it, Repair and Verify reveal no errors found. ...

I've tried to edit my .mac homepage, but when I "publish" the edit I get a "your homepage has been published" message immediately - no time to upload anything. And the page stays unedited. I need to update the info fairly urgently. Quicksilver G4 933Mhz 10.4.7 (but it was doing this under 10.4.6 too). iWeb is working OK and I can edit this, Is homepage a dead end or...

I will say this, there seems to be a air of snobbery with mac users, the idea should be to promote the OSX system to "catch" the XP users and prove to them that there is life outside the "box". ...

If you're getting the floppy disc icon, it typically means that no operating system is installed *at all*. You will need to get an operating system to put onto it in order to make it work. The latest Mac OS X (10.4) will work fine on the Quicksilver. Load the CD, and hold down "C" while powering the system on to make it boot from CD.