Quicksilver

I have a quicksilver with a 250 gig internal, connected via a PCI to IDE ATA-133 Controller card (neeeded for the computer to run a drive that large). I have an external drive via firewire I use for backup. Installed the larger internal drive over a year ago, there are multiple profiles on the computer (me, wife and 3 kids) and it's been working fine and dandy. Suddenly the...

Hey Rhisiart, glad you got your Quicksilver back up and running. Wonder if maybe your PRAM battery is dead, think they don't last much beyond five years or so. ...

Anyway, I had no problem changing the board on my iMac, and I'm an idiot. Looks like your QuickSilver is actually even easier to service, from the link you provided. ...

I own a 2001 G4 PowerPC Quicksilver (800Mhz/1.25 GB RAM). Last week I upgraded from 10.4.10 to 10.4.11. I then found that the PC would not go to Sleep. I ran Disc Utility, but this made no difference. I then reset the PRAM. Now when I boot up all I see is a grey screen, complete with Apple logo, but no spinning gear. I have tried booting up in both Safe Mode and Single...

Do you not like the MacBook Air?

We are having a permissions issue with files transferred between our Intel and PowerPC Macs in our design department. Specifically we have two PowerPC machines - one a G4 (Quicksilver) and one a G5 (Dual 2.3ghz) - and two Intel machines - both dual core Intel Xeon. All four machines are running system 10.4.11. An important note and possibly the problem creator is that all...

I have a similar issue with my monitor. HP LP2065 Wont run at 1600-1200. I have a G4 Sawtooth (OS9) and a Quicksilver (OSX) How do you reset the VRAM in those?

I also have a quicksilver with teh same issue. That one has the stock GF2mx with ADC and VGA. I dont think that one works even with the VGA. ...

Not sure this is in the right forum, but here goes. Not good news I'm afraid. I had a Quicksilver G4 which was exhibiting the same symptoms, though they were proceeded by a period where it would run for about 5 minutes before powering off. ...

Hi y'all, my first post. I'm running a PowerPC G4 Quicksilver Dual 1.25Ghz with 2GB RAM and OSX 10.4.11. I've purchased a Leopard upgrade and the message I get right at the beginning is that it cannot find Mac OSX 10. ...